Get Your Board and Batten Done

1 views
Get Your Board and Batten Done

Board and batten siding are not the expensive decoration type. They are exterior type siding or the interior paneling that will alter the wide boards. You can also use it to narrow the wooden strips, which are known as battens. If you do not know these, you should go through this post and get genuine information.

What are Board and Batten?

When we look at the history, the board and Batten wall would be placed over a seam between the wide board. This will create stronger and durable siding. Many people have been using them for barns and garden sheds due to their inexpensive and easy-to-install properties. They are also known as bard siding because various barns use them. Today, many people use the board and batten vinyl siding for houses to get comfortable informality.

The board and batten accent wall, which will use the brace that is horizontal, is formal and more provincial than the louvered shutters. You do not have to use the wood batten because you will be using the board, which is important. There are various types of board and batten metal siding, it depends on whether you want them or not. Many people use farmhouse board and batten siding for their house and it looks beautiful.

Reverse Board and Batten comprise narrow boards with broad battens that you will install over the seams. Like the horizontal board and batten panels, the size will play a highly essential role. It affects how the natural lights create shadows. Batten board siding will look great when you complete the process. If you want to, you can go for the board and batten half the wall if you don’t.

What are the Steps of Installing the Board and Batten?

To execute the DIY wall board and batten wall, you should follow the steps given below. Make sure they read it carefully and thoroughly so that you do make any mistakes.

Step 1: Remove the Existing boards

Hardwood Flooring

Source: bark.com

The initial thing to do before installing a modern board and batten accent wall is to remove the boards that are there already. To do this, you will have to score the top and corner caulk lines with the help of a utility knife. After doing that, you can cause a prybar and hammer to remove the baseboard from the wall. If you have thinner boards than the molding that you will use, you should cut the battens. You can do this with the help of a mitered angle at the bottom to save the original baseboard.

Although you can do it, it may not look professional or nice because baseboards of the same thickness as the vertical batten boards are best. For this reason, you can also replace the baseboard with the same style as the other board and batten pieces.

Many people use a 1×4 board to match the existing height of the baseboard that is in the place so that they can get a smooth finishing. However, it is up to you what you prefer with the baseboard and what to do with it. Play with it according to your preferences.

If you have a wall with noticeable textures and want to make it look smooth for the board and batten spacing. You should attach 1/8 panel board, whether it is plywood or hardboard. You can get them in 4×8 foot sheets. The store where you will buy them will cut them according to your preferences. You should always be greedy and selfish if it is about the board and batten exterior. The battenboard wall is something that you will have to look at daily. Board and batten exterior walls are the best and they are highly cost-effective.

Step 2: Install New Baseboards

board and batten

Source: Pinterest.com

For the batten wall, you should measure the wall lengths and cut the 1×4 to size with the help of a miter saw. If your wall is about 10ft long, you should get the 12ft long pre-primed board and cut the board to a bit longer than 10ft. If you have walls longer than 10ft, you can use more than boards and fill the seas between the boards with the help of wood filler, caulk, and spackle. It can help you to get the best board and batten exterior siding. After that, you should install the baseboard at the bottom of the wall with a brad nailer. It will go into the wall studs.

You can also use a level for installation to make sure that the baseboard is level when you are installing it. If you are doing one accent wall, it is better to cut the adjacent wall molding corners with Dremel, wood chisel, and jigsaw. You can also use a hammer so that you can fit the new board.

You can also take the help of tools for cutting around the wall objects such as outlets. If you do not know how to cut through the wall items, you can take the help of the internet. It can help you to solve any type of problem.

Step 3: Attach Middle Board to the Wall

board and batten

Source: pinterest.com

You should determine how high you want your Diy board and Batten full wall. If you want the wall to go a little higher than at 55’’ high after the board, a batten accent wall was completed. If yes, your middle 1×4 board should go to the bottom of it 48” above the top of the baseboard.

You can take the help of level and mark the 48” up from the baseboard top on both wall sides. After that, you can cut a 1×4 board so that you can size it for the wall length and place them at the marks with 2” brad nails into the wall studs.

Step 4: Determine Batten

board and batten

Source: brainstudy.com

It is better that you determine what the spacing should be for the DIY board and batten siding. Suppose you want your board and Batten exterior siding to have a board that starts and ends on both corners of the wall. You should get help by reading the following: if you want 16-18 inches of spacing between each board. The common spacing is in the range of 12-20”. To get the math right and know how many battens you would have to use, you should take the total wall length of 123.5” and divide it by 17”, which will give you around seven boards.

Step 5: Attach the Battens

board and batten

Source: pinterest.com

You should mark the wall where the batten siding will go based on the spacing you got by following step 4. After that, you should measure the precise height needed for each Batten based on where you will attach them on the wall. Most of the homes do not have a perfectly straight line. The measure will be somewhat different for each. You should cut each 1×4 Batten for sizing by using the miter saw.

Step 6: Add the Top Board

board and batten

Source: pinterest.com

You should cut the 1×2 board to size and place them on the middle 1×4 board with brad nails. Also, put some adhesive for creating a top ledge. You can also add the original shoe molding back to the baseboard to match the other side wall molding and cover the flooring gaps.

Step 7: Fill Holes, Paint, and Caulk

board and batten

Source: diynetwork.com

You should fill all the nail holes with the help of a lightweight spackle and wait till it dries. After that, you should lightly hand sand any excess if required. When you are done with that process, you should then caulk all the corners and seams with the help of paintable caulk. 

The next step is to paint the board and batten the wall. If you did not use the pre-primed boards, you should do the priming first. You can select any color of your preferences and make sure that the color you choose will sit well with the house.

What are the Benefits of Board and Batten?

When you opt for the boards and batten, you will get the following benefits:

Aesthetic Quality

board and batten

Source: pinterest.com

They will enhance the aesthetic quality of the house. It will give you the freedom to choose various color schemes.

Durability

board and batten

Source: pinterest.com

When we look at the cost, they will go beyond your expectations when it is about durability. The original materials of the siding are able to withstand severe weather conditions for years.

Easy Installation

board and batten

Source: washingtonpost.com

You can replace and install the board without any difficulty. The installation style and pattern require less effort for stripping down the siding panels. It will reduce the chances of damage.

board and batten

Source: pinterest.com

board and batten

Source: elliesonmade.com

board and batten

Source: restleydhomes.com

board and batten

Source: blueprop.com

board and batten

Source: pinterest.com

board and batten

Source: pinterest.dk

Source: pinterest.com

 

Conclusion

There you have it. These are all the steps and tips on installing the board and batten accent wall for your house. If you come across any problem, it is better that you take the help of someone who will help and provide you with tips. The guidance of someone experienced in this can help you make the best board & batten wall. There are also bathroom boards and batten, but it is better if you take the help of someone professional.

Keep coming to Innovativedecorideas for more helpful articles on house improvement and decoration.

For more information, visit innovativedecorideas.